Serving the Los Angeles area  ·  (213) 325-2806  ·  Open Mon-Sun 7am-7pm
📞 (213) 325-2806 Free Quote

Metal Roofing in Whittier, CA (90602) · Local Professionals

Los Angeles Metal Roofing · Fast response in Whittier and the Los Angeles area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+226Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Whittier's hillside Craftsman bungalows and mid-century ranch homes were built for a gentler climate, but the shingle roofs they carry have spent decades under relentless Southern California sun. If you live near Uptown Whittier or along the bluffs above Painter Avenue, you've probably noticed granules in your gutters and curling shingles on the south-facing slope. That's the pattern we see across 90602.

Los Angeles Metal Roofing installs, repairs, and replaces metal roofing for Whittier homeowners and property managers. From the historic homes near Whittier College to the ranch tracts off Whittier Boulevard, we know how this city's housing stock ages, and we bring insured crews who handle everything from standing seam to metal shingle retrofits. Call (213) 325-2806 for a free on-site estimate.

Metal Roofing in Whittier (90602)

Whittier sits at the edge of the Puente Hills, and that terrain shapes the work. Hillside lots often have tight side yards, steep driveways, and mature trees whose limbs hang over the roof. We plan access carefully so we don't tear up landscaping or block neighbors' driveways. The older Craftsman homes near the Whittier College campus and in Uptown frequently have low-pitched shingle roofs with deep porches, which makes metal roof over shingles (retrofit) a practical option when the existing decking is sound. Down in the flats, ranch homes off Lambert Road and near Parnell Park have wider lots but aging shingle roofs that take a beating from summer heat. Our team checks attic ventilation and flashing details before recommending a full replacement, because metal over a poorly vented roof will trap heat and shorten the life of the panels.

We've worked throughout Los Angeles County, from Silver Lake bungalows to San Fernando Valley ranches, and we bring that experience to every Whittier job. Whether it's a Spanish Colonial Revival near Central Park or a 1950s ranch in the Hadley neighborhood, we match the panel profile and color to the house, not to a catalog.

Our services in Whittier

How a Job Works in Whittier

Step 1: You call (213) 325-2806 or request a free estimate online. We schedule an on-site assessment, usually within a few days. We inspect the roof, attic, flashing, and gutters, then walk you through what we find. You get a written scope and price before any work starts, and we answer questions about panel types, colors, and whether a retrofit makes sense for your home.

Step 2: Once you approve, we pull the required roofing permit through the City of Whittier. Permit timing varies, and we handle the paperwork and inspection scheduling. On hillside properties, we stage materials carefully to avoid blocking narrow streets, and we coordinate with HOAs when design review is required. Our crews are fully insured, and we protect your landscaping and windows before tear-off begins.

Step 3: When the work is done, we magnet-sweep the yard for nails, haul away all debris, and walk the roof and gutters with you. We don't leave until you've seen the finished job and understand the warranty. Your property is left clean, and we're available for follow-up questions.

Pricing in Whittier depends on roof size, pitch, access, and the condition of the existing decking. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and metal roof over shingles (retrofit) at $7. Metal shingle and stone-coated steel both start at $9 per square foot, while corrugated and ribbed panel roofing starts at $5.50. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight repair at $600. Coating and painting starts at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. Hillside access, multiple roof levels, and urgent storm damage can affect the final number. Call (213) 325-2806 for a free estimate tailored to your Whittier home.

My 1920s Craftsman near Uptown Whittier has its original shingle roof. Can you install metal over it, or do I need a full tear-off?
It depends on the condition of the shingles and the decking underneath. If the existing roof has only one layer and the decking is solid, a metal roof over shingles retrofit is often allowed by code and saves on disposal costs. We inspect the attic and flashing first. Homes near the Whittier College campus sometimes have historic character to preserve, and we can recommend panel profiles that suit the architecture.
A Santa Ana wind event peeled back panels on my roof near Painter Avenue. How fast can you respond?
We prioritize storm and wind damage calls. Call (213) 325-2806 and we'll schedule an inspection, often same or next day depending on volume. We can tarp active leaks and secure loose panels to prevent further damage, then provide a written repair estimate. We document the damage for insurance purposes, though coverage decisions are up to your carrier.
What does a typical metal roof replacement cost for a 1,500-square-foot ranch home in 90602?
For a simple ranch roof, most replacements fall in the range of $9 to $14 per square foot installed, depending on panel type, pitch, and whether we tear off the old roof. That puts a 1,500-square-foot roof roughly between $13,500 and $21,000. Retrofits over existing shingles can be lower. We give you a firm number after inspecting the roof and attic.
Do I need a permit from the City of Whittier for a metal roof replacement?
Yes, a roofing permit is typically required for a full replacement or re-roof, and inspection requirements apply. Rules and fees vary, so we confirm the current requirements with the city before starting. You can also check the City of Whittier website for general information. We handle the permit application and inspections as part of the job.
My neighbor says my new metal roof panels overhang the property line. What should I do?
Property line issues are common on tighter Whittier lots. We build to the dimensions on your survey and pull permits that require compliance with setback rules. If a dispute comes up, we recommend getting a survey and talking with your neighbor before work begins. For HOA communities, we also submit color and profile choices for design review when required.
Are you fully insured for work on my Whittier property?
Yes. We carry general liability insurance and workers' compensation coverage for every crew member.
What maintenance does a metal roof need in Whittier's heat and occasional winter storms?
Metal roofs are low maintenance, but we recommend an annual inspection, especially after Santa Ana wind season and before the winter rains. Check fasteners for backing out, clear debris from valleys and gutters, and look for lifted panels or sealant wear around flashing. A coating every 10 to 15 years can extend the finish life. We offer free inspections to catch small issues before they become leaks.
Why choose us?

Trusted professionals in Los Angeles

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Los Angeles

All your work handled by qualified professionals in Los Angeles

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

226+ Verified Client Reviews in Los Angeles

⭐⭐⭐⭐⭐ 4.9/5 · 226 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Los Angeles · Response within 24h · No commitment · ☎ (213) 325-2806

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Los Angeles ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm