Serving the Los Angeles area  ·  (213) 325-2806  ·  Open Mon-Sun 7am-7pm
📞 (213) 325-2806 Free Quote

Metal Roofing in Pomona, CA (91766) · Local Professionals

Los Angeles Metal Roofing · Fast response in Pomona and the Los Angeles area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+226Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Pomona is a city of older bungalows and 1950s ranches, many with faded roofs and failing flashing after years of heat waves. If you live near the Fairplex or in the Lincoln Park neighborhood, you know how intense the sun gets by August.

That is why homeowners in 91766 call Los Angeles Metal Roofing. We specialize in metal roof replacement and coating for Pomona's aging housing stock, and we understand the specific challenges of roofs that have baked under decades of Inland Empire sun.

Metal Roofing in Pomona (91766)

Pomona's housing stock includes 1920s bungalows with low-pitched roofs, 1950s ranches with shallow slopes, and older stucco homes with failing flashing. Many properties have tight lot access, mature trees that drop debris, and drainage issues from flat or low-slope sections. The heat here is relentless, and roofs take a beating from UV and thermal cycling. We see a lot of dried-out sealant, cracked pipe boots, and loose fasteners.

Our team has worked on roofs throughout Pomona and the surrounding Los Angeles area. We know how to handle the tight access in older neighborhoods and the specific ventilation needs of these homes.

Our services in Pomona

How a Job Works in Pomona

Step 1: Call us at (213) 325-2806 or request a free on-site assessment. We will inspect your roof, check for leaks, and discuss your options. We will also review any permit requirements with the City of Pomona website to make sure the job is done right.

Step 2: Once you approve the estimate, we schedule the work. For many Pomona homes, we can install a metal roof over your existing shingles if code allows, which saves time and disposal costs. We handle the permit process and coordinate with your schedule.

Step 3: After installation, we clean up thoroughly and walk you through the finished roof. We do not leave until you are satisfied and your property is clean.

Pricing in Pomona depends on roof size, access, and condition. For a typical 1,500 sq ft ranch, metal roof installation starts around $8 per square foot, while standing seam starts at $10. A full replacement starts at $9 per square foot. If your roof just needs repair, we start at $450 for leak fixes. Coating and painting start at $2.50 per square foot, which is a cost-effective option for older roofs that are still structurally sound. Call (213) 325-2806 for a free estimate tailored to your home.

My 1950s ranch in Pomona has a low-slope roof and the shingles are curling. Can you install metal over it?
Yes, in many cases we can install a metal roof over your existing shingles, provided the structure is sound and local code allows it. We will inspect your roof deck and let you know if a retrofit is feasible. This can save you money on tear-off and disposal.
A windstorm just lifted some panels on my roof in Pomona. How fast can you respond?
We offer free inspections for storm and wind damage. Call us at (213) 325-2806, and we will schedule a visit as soon as possible. We can secure the roof temporarily and provide a repair estimate.
What is the typical cost for a metal roof replacement on a 1,200 sq ft home in 91766?
For a 1,200 sq ft home, a basic metal roof replacement might range from $10,800 to $15,000, depending on the material and complexity. Standing seam will be at the higher end. We provide free estimates so you can get an accurate price for your specific roof.
Do I need a permit for a metal roof in Pomona?
Yes, roofing permits are typically required for a full replacement or re-roof. The City of Pomona website has information on permit requirements, or you can call the building department. We can help you navigate the process and ensure your project complies with local regulations.
My neighbor's tree branches hang over my roof. Can I trim them without permission?
In California, you generally have the right to trim branches that overhang your property line, but you should check with your neighbor first and make sure you do not damage the tree. If the tree is in a historic district or HOA, there may be additional rules. We can advise on roof protection and repairs if branches have caused damage.
Are you fully insured for work on my Pomona property?
Yes, we carry general liability insurance and workers' compensation coverage. Your property and our crew are protected.
How often should I inspect my metal roof in Pomona?
We recommend an annual inspection, especially after the summer heat and before the winter rains. Check for loose fasteners, damaged sealant, and debris buildup. Regular maintenance can extend the life of your roof and prevent leaks.
Why choose us?

Trusted professionals in Los Angeles

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Los Angeles

All your work handled by qualified professionals in Los Angeles

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

226+ Verified Client Reviews in Los Angeles

⭐⭐⭐⭐⭐ 4.9/5 · 226 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Los Angeles · Response within 24h · No commitment · ☎ (213) 325-2806

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Los Angeles ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm