Serving the Los Angeles area  ·  (213) 325-2806  ·  Open Mon-Sun 7am-7pm
📞 (213) 325-2806 Free Quote

Metal Roofing in Malibu, CA (90263) · Local Professionals

Los Angeles Metal Roofing · Fast response in Malibu and the Los Angeles area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+226Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Malibu is a narrow ribbon of a city where the Santa Monica Mountains drop straight to the Pacific, and the housing stock reflects that squeeze: mid-century beach cottages on Zuma Beach, canyon ranches tucked into Solstice Canyon, and hillside contemporaries above Point Dume, all within a few miles of Pepperdine's hillside campus. Roofs here take a beating from salt air, Santa Ana winds, and wildfire embers, and the steep lots and tight driveways off Pacific Coast Highway make every job a little different.

Homeowners in Malibu (90263) call Los Angeles Metal Roofing because we understand that a roof here is not just shelter, it is fire protection and corrosion resistance. Whether you are up in Malibu Canyon or right on the sand near Malibu Pier, we bring insured crews who know how to handle Standing Seam Metal Roofing and Metal Roof Inspection without cutting corners.

Metal Roofing in Malibu (90263)

Malibu properties are rarely simple. Beachfront homes face constant salt spray that eats through fasteners and standard flashing, while canyon and ridge homes sit on slopes steep enough that staging a crew requires careful planning. Many lots are long and narrow with limited access from Pacific Coast Highway or Kanan Dume Road, so we often have to carry materials by hand or use compact lifts. The soil moves on some of these hillsides, and drainage has to be routed carefully to avoid undermining foundations. Then there is the wildfire factor: ember-resistant roofing assemblies and proper flashing details are not optional here, they are essential. We also deal with the marine layer and intense UV, which can degrade lower-grade metals quickly, so we recommend finishes and gauges suited to coastal exposure.

Our team has worked throughout Los Angeles County, from the Palisades to Santa Monica, and we bring that experience to every Malibu project. We know the local building department's expectations and the inspection process, and we plan for the wind and fire requirements that apply in this city.

Our services in Malibu

How a Job Works in Malibu

Step 1: You call us at (213) 325-2806 or request a free estimate online. We schedule an on-site assessment at your Malibu property, where we inspect the existing roof, check the decking and flashing, and talk through your options. We will also flag any access issues, like a steep driveway or a gate code, so there are no surprises later.

Step 2: Once you approve the scope and price, we pull the required permits through the City of Malibu and coordinate with your HOA if you have one. Our crews arrive with the right equipment for tight lots and steep grades, and we protect your landscaping and windows as we work. For a full replacement, we typically tear off the old roof, inspect and repair the deck, then install the new metal roof with manufacturer-approved fasteners and flashing. We keep you updated on progress and any weather delays.

Step 3: After installation, we do a thorough cleanup, magnet-sweep the driveway and lawn for nails, and walk the roof with you to make sure you are satisfied. We leave your property clean and provide a final inspection checklist.

Pricing in Malibu reflects the complexity of the work. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and replacement at $9. If you are retrofitting over existing shingles, that starts at $7 per square foot. Repairs, including leak fixes, start at $450, and screw replacement or re-fastening starts at $750. Corrugated panel roofing is the most economical at $5.50 per square foot, while copper and specialty metals start at $20. Coating and painting start at $2.50 per square foot. The final cost depends on roof size, access, condition, and urgency, so we always provide a free estimate after seeing your property. Call (213) 325-2806 to schedule yours.

My Malibu Canyon home has a steep roof and limited access. Can you still install a standing seam metal roof?
Yes. We regularly work on steep hillside properties in Malibu Canyon and the Santa Monica Mountains. We use specialized staging, roof jacks, and sometimes compact lifts to safely access the roof. Our crews are trained for fall protection and we plan the job to minimize disruption. We will assess access during the free estimate and explain our approach.
A Santa Ana wind event just peeled back some panels on my roof near Zuma Beach. How fast can you respond?
We prioritize storm and wind damage calls in Malibu. Call us at (213) 325-2806 and we will schedule an inspection as soon as possible, often within 24 to 48 hours depending on demand. We can tarp or secure the area to prevent further damage and provide a written repair estimate. We also document damage for insurance claims if needed.
What does a metal roof repair typically cost in Malibu, and what factors affect the price?
Most repairs start at $450, but the final cost depends on the extent of damage, roof pitch, accessibility, and whether we need to replace flashing or fasteners. For example, a simple leak repair might be on the lower end, while a larger section with corroded fasteners could be higher. We give you a firm quote after inspecting the roof.
Do I need a permit to replace my roof in Malibu, and how do I find out the requirements?
Yes, a roofing permit is typically required for a full replacement or re-roof in Malibu. The rules and fees vary, so it is best to check with the City of Malibu directly. You can start at the City of Malibu website for contact information and general guidance. We handle the permit application process for you as part of our service.
My neighbor and I share a property line, and my new metal roof will overhang slightly. What should I do?
Property line issues can be sensitive. We recommend reviewing your property survey and discussing any overhang with your neighbor before work begins. If you are in an HOA, check the architectural guidelines first. We can adjust the design to stay within your property lines and help you coordinate with your neighbor if needed.
Are you insured for work on my Malibu property?
Yes, we are fully insured with general liability and workers' compensation coverage. This protects you and your property in case of any accidents during the project.
What maintenance does a metal roof need in Malibu's coastal environment?
Salt air and UV can affect fasteners and finishes over time. We recommend an annual inspection, especially after winter storms and before fire season. Check for loose fasteners, debris in gutters, and any signs of corrosion. A periodic coating can extend the life of the finish. We offer maintenance plans and free inspections to keep your roof in good shape.
Why choose us?

Trusted professionals in Los Angeles

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Los Angeles

All your work handled by qualified professionals in Los Angeles

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

226+ Verified Client Reviews in Los Angeles

⭐⭐⭐⭐⭐ 4.9/5 · 226 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Los Angeles · Response within 24h · No commitment · ☎ (213) 325-2806

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Los Angeles ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm