Serving the Los Angeles area  ·  (213) 325-2806  ·  Open Mon-Sun 7am-7pm
📞 (213) 325-2806 Free Quote

Metal Roofing in Inglewood, CA (90305) · Local Professionals

Los Angeles Metal Roofing · Fast response in Inglewood and the Los Angeles area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+226Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Inglewood is a city of single-story stucco bungalows and Spanish Colonial Revival homes, many built between the 1920s and 1950s, sitting on flat lots just east of the 405 and south of the 10. The sun here is relentless, and year after year it bakes the life out of asphalt shingles and dries out flashing until the first winter rain finds a way in.

That's why homeowners in Inglewood (90305) call Los Angeles Metal Roofing. We know the housing stock around Market Street and the streets near Edward Vincent Jr. Park, and we've replaced enough sun-faded roofs here to tell you exactly what a metal roof will and won't fix. One call to (213) 325-2806 and we'll come take a look.

Metal Roofing in Inglewood (90305)

Most of the homes we work on in Inglewood are low-pitch to moderate-pitch roofs on single-story stucco houses, often with attached garages and narrow side yards. That layout matters. Tight lot lines mean we stage materials in the driveway and hand-carry panels around the house, and we plan the tear-off so the dumpster never blocks a neighbor's driveway on trash day. The flat terrain also means drainage is all about the roof itself: if gutters and downspouts aren't sized and pitched right, water pools at the foundation instead of running to the street. And because many of these homes have original 1x6 skip sheathing under the old shingles, we check the deck condition before we ever quote a retrofit. We serve Inglewood and the surrounding Los Angeles area, from the flats near the Forum to the quieter blocks off Manchester Avenue.

Our experience serving Inglewood and the Los Angeles area means we've seen every version of sun damage, wind-lifted panel, and failed flashing this city can produce. We bring that to every estimate.

Our services in Inglewood

How a Job Works in Inglewood

Step 1: You call (213) 325-2806 or send a message, and we schedule a free on-site assessment. We walk the roof, check the deck and flashing, look at your attic ventilation if it's accessible, and talk through what you're trying to solve. You get a written estimate with the panel profile, color, and scope spelled out.

Step 2: Once you approve, we pull the roofing permit through the City of Inglewood and schedule the work. On most Inglewood jobs we tear off to the deck, replace any soft sheathing, and install new underlayment and flashing before a single panel goes down. If your HOA has design review, we coordinate the paperwork and color approval before we order material, so there are no surprises. Tight side yards and shared driveways get a written staging plan so your neighbors know what to expect.

Step 3: We clean up every day and do a magnet sweep at the end of the job, then walk the roof and the ground with you before we call it done. We leave your property clean, and we don't ask for final payment until you've had a chance to look it over.

Pricing in Inglewood depends on roof size, pitch, access, and how much deck repair is hiding under the old shingles. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and metal roof replacement at $9. If you want to go over existing shingles, a retrofit starts at $7 per square foot, though the number of existing layers is limited by code. Repairs and leak repairs start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight work at $600. Coating and painting starts at $2.50 per square foot and is a good option for a sound metal roof that's just faded. Every roof is different, so call (213) 325-2806 for a free estimate and a real number for your house.

My 1940s stucco bungalow near Market Street has the original skip sheathing under the shingles. Can you still install a metal roof?
Yes, and we see this all the time in Inglewood. Skip sheathing (spaced 1x6 boards) is common on homes of that era. We inspect it for rot and loose boards, replace what's needed, and then install a solid underlayment over it before the panels go down. On some profiles we'll recommend a solid deck overlay for better fastener holding, and we'll explain the tradeoff in cost and performance before you decide.
A Santa Ana wind event peeled back panels on my roof. How fast can you get out to Inglewood?
We treat wind damage as a priority. Call (213) 325-2806 and we'll schedule an inspection, often same day or next day depending on storm volume. We'll secure the roof to prevent further water intrusion, document the damage with photos for your insurance file, and give you a repair or replacement estimate. We never promise what your policy will cover, but we do make the documentation as clear as possible.
What does a typical metal roof repair cost in Inglewood?
Most repair calls in Inglewood start at $450 for a leak repair or general repair, and screw replacement and re-fastening starts at $750. The final number depends on roof access, how many fasteners or panels are involved, and whether the leak has damaged the deck or insulation. We give you a fixed price before we start, and we don't add surprise charges.
Do I need a permit to replace my roof in Inglewood?
In most cases, yes. A full replacement or re-roof typically requires a roofing permit, and inspection requirements vary. We pull the permit for you and handle the inspection scheduling. For the specific rules that apply to your address, check with the City of Inglewood website or call the building department directly, since requirements can change and some properties have additional design review.
My neighbor's tree drops limbs on my roof and my HOA wants a specific panel color. How do you handle that?
We deal with both issues regularly in Inglewood. On the property line, we document the roof condition before we start and keep our staging on your side of the line. For HOA design review, we submit the panel profile and color samples for approval before we order material, and we build that approval time into the schedule so your installation doesn't get delayed.
Are you fully insured for work on my Inglewood property?
Yes. That protects you if anything goes wrong on your property and covers our crew while they're on your roof.
What maintenance does a metal roof need in Inglewood's climate?
The main things are annual inspections, clearing debris from gutters and valleys, and checking fasteners and sealant on flashing. Inglewood's sun is hard on sealants, so we recommend a check every year or two, especially after summer heat and before the winter rains. Coating and painting every several years can extend the life of a painted metal roof and keep it looking sharp.
Why choose us?

Trusted professionals in Los Angeles

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Los Angeles

All your work handled by qualified professionals in Los Angeles

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

226+ Verified Client Reviews in Los Angeles

⭐⭐⭐⭐⭐ 4.9/5 · 226 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Los Angeles · Response within 24h · No commitment · ☎ (213) 325-2806

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Los Angeles ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm