Serving the Los Angeles area  ·  (213) 325-2806  ·  Open Mon-Sun 7am-7pm
📞 (213) 325-2806 Free Quote

Metal Roofing in Pasadena, CA (91104) · Local Professionals

Los Angeles Metal Roofing · Fast response in Pasadena and the Los Angeles area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+226Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Pasadena's Craftsman bungalows and Spanish Colonial Revival homes near the San Gabriels need roofs that can handle intense sun, Santa Ana winds, and the occasional heavy winter storm. If you live in 91104, you're probably in one of those 1920s or 1930s houses with deep porches and low-pitched roofs, or a mid-century ranch with a low-slope roof that's seen better days. We know this housing stock because we work on it every week.

Homeowners in Pasadena call Los Angeles Metal Roofing when they're tired of patching asphalt shingles that bake and crack in the heat, or when a windstorm lifts panels and leaves a leak. We're based in Los Angeles and serve Pasadena and the surrounding areas, and we specialize in metal roofing systems that hold up to our local climate. Whether you're near Caltech or over by the Rose Bowl, we can help you figure out the right metal roof for your home.

Metal Roofing in Pasadena (91104)

Pasadena's terrain and housing stock present specific challenges for roofing. Many homes sit on sloped lots with mature trees, and the combination of tight access and steep grades means we often have to plan carefully for material staging and fall protection. Craftsman bungalows typically have low-pitched roofs with deep eaves, which can hide underlying issues like dry rot or failed flashing. Spanish-style homes with clay tile roofs often need a metal retrofit that respects the original profile while improving fire resistance and energy efficiency. The intense UV and heat waves we get here can degrade asphalt shingles quickly, and Santa Ana winds can lift poorly fastened panels. We also see a lot of older homes with multiple roof layers, which can affect whether a retrofit is allowed under current code.

Our team has been serving Pasadena and the greater Los Angeles area for years, and we understand the local building department's requirements and the common pitfalls of roofing in this city. We're fully insured with general liability and workers' compensation, so you're protected.

Our services in Pasadena

How a Job Works in Pasadena

Step 1: Give us a call at (213) 325-2806 or fill out our online form to schedule a free on-site assessment. We'll inspect your roof, discuss your options, and provide a detailed written estimate. We'll also help you understand any permit requirements and can point you to the City of Pasadena website for more information on local rules.

Step 2: Once you approve the estimate, we'll schedule the work and handle the permitting process. On the day of installation, our crew will arrive early, protect your landscaping, and get to work. For homes with tight lot access, we may need to use specialized equipment or coordinate with neighbors for staging. We'll keep you informed throughout the project and make sure the job site is safe and secure each day.

Step 3: After the work is complete, we'll do a thorough cleanup, including magnet sweeping for nails and debris removal. We'll walk through the finished roof with you, answer any questions, and provide a warranty and care guide. We leave your property clean and your roof ready for the next storm season.

Metal roofing in Pasadena typically ranges from $8 to $10 per square foot for installation, depending on the material and complexity. Standing seam metal roofing starts at $10 per square foot, while metal roof replacement starts at $9 per square foot. If you're considering a retrofit over existing shingles, that starts at $7 per square foot, but keep in mind that code limits the number of layers you can have. Repairs start at $450, and leak repairs also start at $450. Screw replacement and re-fastening starts at $750. For specialty metals like copper, expect to start at $20 per square foot. The final cost depends on the size of your roof, access, the condition of the existing roof, and how quickly you need the work done. Call us at (213) 325-2806 for a free estimate tailored to your home.

My 1920s Craftsman bungalow in Pasadena has a low-pitched roof with original shingles. Can I install a metal roof over it?
In many cases, yes, but it depends on the condition of the existing roof and local code. Pasadena follows California building code, which limits roof recover to a certain number of layers. We'll inspect your roof and let you know if a retrofit is allowed or if a full tear-off is needed. We can also discuss panel profiles that complement the Craftsman style.
A windstorm just lifted some panels on my roof in Pasadena. Do you offer emergency repairs?
Yes, we offer storm and wind damage repair, and we provide free inspections for storm damage. Call us at (213) 325-2806 to schedule a prompt assessment. We'll secure the roof and provide a detailed repair estimate.
What's the typical cost for a metal roof replacement on a 1,500-square-foot home in Pasadena?
For a 1,500-square-foot home, a metal roof replacement typically starts around $13,500 to $15,000, depending on the material and complexity. Factors like roof pitch, access, and the number of existing layers can affect the final price. We'll give you an exact quote after inspecting your roof.
Do I need a permit to replace my roof in Pasadena?
Yes, a roofing permit is generally required for a full replacement or re-roof in Pasadena. The rules and fees vary, so it's best to check with the city. We can guide you through the process and often handle the permitting for you. For official information, visit the City of Pasadena website.
My HOA requires approval for exterior changes. Can you help with the approval process for a metal roof?
Yes, we can provide documentation such as material samples, color options, and specifications to help you get HOA approval. We'll work with your HOA to ensure the installation meets their requirements. We can also advise on property line issues if you're concerned about neighbor setbacks.
Are you insured for roofing work in Pasadena?
Yes, we are fully insured with general liability and workers' compensation coverage. We can provide a certificate of insurance upon request so you can verify our coverage before work begins.
How often should I inspect my metal roof in Pasadena?
We recommend an annual inspection, especially after the rainy season and before Santa Ana winds arrive. Check for loose fasteners, debris buildup, and signs of wear. We offer free estimates for inspections and can perform routine maintenance to extend the life of your roof.
Why choose us?

Trusted professionals in Los Angeles

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Los Angeles

All your work handled by qualified professionals in Los Angeles

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

226+ Verified Client Reviews in Los Angeles

⭐⭐⭐⭐⭐ 4.9/5 · 226 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Los Angeles · Response within 24h · No commitment · ☎ (213) 325-2806

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Los Angeles ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm