Serving the Los Angeles area  ·  (213) 325-2806  ·  Open Mon-Sun 7am-7pm
📞 (213) 325-2806 Free Quote

Metal Roofing in Burbank, CA (91502) · Local Professionals

Los Angeles Metal Roofing · Fast response in Burbank and the Los Angeles area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (213) 325-2806
+226Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Burbank is a city of mid-century ranches and foothill homes where the sun hits hard and the shingle roofs are showing their age. From the flat lots near Downtown Burbank to the sloping yards up against the Verdugo Mountains, homeowners here need roofing that can take the heat and the occasional Santa Ana wind.

At Los Angeles Metal Roofing, we specialize in helping Burbank residents (91502) upgrade to metal roofing that lasts. Whether you're near John Muir Middle School or off Magnolia Boulevard, we know the local housing stock and what it takes to protect it.

Metal Roofing in Burbank (91502)

Burbank's terrain ranges from flat valley floor to sloped foothill properties, and that affects how we approach every job. Many homes here are single-story ranches with low-pitch roofs, which are perfect candidates for metal roof over shingles (retrofit) or coating. But the intense UV and heat waves we get mean that asphalt shingles degrade faster here than in cooler climates. We often see cracked, curling shingles and failed flashing on homes that are only 15 to 20 years old. Hillside homes near Brace Canyon Park may have steeper pitches and tighter access, requiring careful staging and sometimes crane work. We also deal with the occasional atmospheric river that dumps heavy rain in a short time, so proper drainage and flashing details are critical.

Our team has been serving Burbank and the surrounding Los Angeles area for years, and we understand the local building department's requirements and common HOA design standards. We're fully insured and committed to doing the job right.

Our services in Burbank

How a Job Works in Burbank

Step 1: It starts with a phone call to (213) 325-2806 or a request through our website. We'll schedule a free on-site assessment at your Burbank property, where we inspect your existing roof, take measurements, and discuss your options. We'll explain what we find and provide a written estimate.

Step 2: Once you approve, we handle the permitting process with the City of Burbank. You can verify local requirements on the City of Burbank website, and we'll make sure everything is in order. Our crews are experienced with tight lot access and coordinating with HOAs if needed. We'll protect your landscaping and keep the work area safe.

Step 3: After installation, we do a thorough cleanup, including magnet sweeps for nails. We walk the property with you to ensure everything meets your satisfaction and answer any questions. We leave your property clean and your new roof ready to protect your home.

Pricing for metal roofing in Burbank depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof over shingles (retrofit) at $7 per square foot. Repairs start at $450, and coatings at $2.50 per square foot. Factors like roof pitch, access, and whether you need additional flashing or structural work can affect the final cost. We provide free estimates and transparent pricing. Call (213) 325-2806 to schedule yours.

My Burbank ranch home has a low-pitch roof. Can I install metal roofing over the existing shingles?
Yes, in many cases a metal roof over shingles (retrofit) is a great option for low-pitch roofs common in Burbank. It saves on tear-off costs and landfill waste. However, building code limits the number of existing layers, so we'll inspect your roof to confirm eligibility and ensure proper ventilation.
How quickly can you respond to storm damage in Burbank?
We offer free inspections for storm and wind damage. If you have an active leak or wind-lifted panels, call us at (213) 325-2806, and we'll prioritize your call. Our team aims to respond within 24 to 48 hours for emergencies, depending on demand.
What does a typical metal roof repair cost in Burbank?
Most repairs start around $450, but the exact cost depends on the issue. A simple leak repair might be on the lower end, while screw replacement or flashing repairs can be more. We'll give you a clear estimate after inspecting the problem.
Do I need a permit for a metal roof in Burbank?
Yes, a permit is typically required for a full replacement or re-roof. The City of Burbank website has information on permit requirements, and we can handle the application for you. Requirements vary, so it's best to check with the building department.
My HOA has design rules. Can you help with approval for a metal roof?
Absolutely. We're familiar with many Burbank HOAs and can provide documentation, color samples, and specifications to help you get approval. We'll coordinate with your HOA to ensure the installation meets their guidelines.
Are you fully insured for work in Burbank?
Yes, we carry general liability insurance and workers' compensation coverage.
How often should I have my metal roof inspected in Burbank?
We recommend an inspection every two to three years, especially after major storms or if you notice any issues. Burbank's intense sun and occasional high winds can loosen fasteners or cause sealant wear. Regular inspections catch small problems before they become leaks.

Nearby service areas

📍 Los Angeles 90012📍 Glendale 91208📍 Pasadena 91104📍 Santa Monica 90401
Why choose us?

Trusted professionals in Los Angeles

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Los Angeles

All your work handled by qualified professionals in Los Angeles

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

226+ Verified Client Reviews in Los Angeles

⭐⭐⭐⭐⭐ 4.9/5 · 226 verified Google reviews

Tom D.
⭐⭐⭐⭐⭐
TD
Tom D.
Pasadena

“We needed a metal roof on our barn out in the valley and these guys knocked it out in two days. The corrugated panels are straight as an arrow and they cleaned up every last screw off the ground. Our horses are back in there happy.”

Agricultural Metal Roofing
Michelle B.
⭐⭐⭐⭐⭐
MB
Michelle B.
Glendale

“We were dreading tearing off the old shingles on our 1920s craftsman, but they did the retrofit right over the top and the house looks brand new. The crew of four was respectful of the old wood trim and finished in three days flat.”

Metal Roof Over Shingles (Retrofit)
Kevin R.
⭐⭐⭐⭐
KR
Kevin R.
Torrance

“Had them put a standing seam roof on my shop building and it came out great. Only reason I'm not giving five stars is they showed up a day late on the first day, but the work itself is solid and the price was fair.”

Commercial Metal Roofing
Karen T.
⭐⭐⭐⭐⭐
KT
Karen T.
Los Angeles

“Just had our whole house done in standing seam and I can't stop looking at it from the street. They walked me through the color options and the finished roof is exactly what I pictured. Crew was in and out in four days and the yard was spotless.”

Standing Seam Metal Roofing
Robert M.
⭐⭐⭐⭐⭐
RM
Robert M.
Burbank

“Water was pouring in around our chimney every time it rained and two other roofers just wanted to sell us a whole new roof. These guys found the failed flashing, fixed it properly, and charged a fraction of what I expected. Bone dry through the last storm.”

Chimney & Skylight Repair
Rachel S.
⭐⭐⭐⭐⭐
RS
Rachel S.
Santa Monica

“Called them out for an inspection after some wind damage and they spent over an hour on the roof and gave me a detailed report with photos. Turns out I just needed a few screws re-fastened, no upselling at all. Honest folks.”

Metal Roof Inspection
Chris A.
⭐⭐⭐⭐⭐
CA
Chris A.
Long Beach

“Our place sits up on a hill and the metal roof had been leaking near the valley for years. They tracked down the source, replaced the bad panels and flashing, and it's been solid through two big rainstorms since. Genuinely relieved.”

Metal Roof Repair
Sarah W.
⭐⭐⭐⭐
SW
Sarah W.
Inglewood

“They installed new gutters matched to our metal roof and it made a huge difference with the runoff. The crew was friendly but left a few metal shavings in the driveway I had to sweep up myself. Overall a good job though.”

Gutters for Metal Roofs
Free Quote

Get Your Free Quote

Metal Roofing in Los Angeles · Response within 24h · No commitment · ☎ (213) 325-2806

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Los Angeles ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm