Serving the Los Angeles area  ·  (213) 325-2806  ·  Open Mon-Sun 7am-7pm
📞 (213) 325-2806 Free Quote

Metal Roofing in Calabasas, CA (91302) · Local Professionals

Los Angeles Metal Roofing · Fast response in Calabasas and the Los Angeles area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+226Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Calabasas is a city of oak-studded hills, guard-gated communities, and winding canyon roads, where homes sit close to the brush and the views come with a fire risk. The mix of Mediterranean-style estates, ranch homes, and newer stucco subdivisions means roofs here need to handle intense sun, Santa Ana winds, and the occasional ember shower.

When a roof starts to fail in Calabasas, whether it's a 1980s ranch off Mulholland or a newer build in The Oaks, homeowners call Los Angeles Metal Roofing because we understand the local terrain and the insurance and permitting landscape. We're based in Los Angeles and serve Calabasas and the surrounding areas, and we're fully insured with general liability and workers' compensation.

Metal Roofing in Calabasas (91302)

Calabasas sits in the Santa Monica Mountains, and that means steep driveways, tight lots, and roofs that are often the highest point for miles. Many homes back onto open brush, so fire resistance is a real concern, not a selling point. Stone-coated steel and standing seam are popular here because they resist ember intrusion and hold up to the sun. The hills also mean drainage matters: water runs fast down slopes, and a poorly flashed chimney or skylight can leak into a living room during a winter storm. We've worked on properties near Calabasas High School and along Las Virgenes Road, and we know how to stage materials on narrow roads and protect landscaping while we work.

Our team has been installing, repairing, and replacing metal roofs across Los Angeles County for years, from Spanish Colonial Revival homes in Silver Lake to mid-century ranches in Sherman Oaks. In Calabasas, we bring that experience to hillside homes and gated communities, and we're comfortable coordinating with HOA design review boards and city inspectors.

Our services in Calabasas

How a Job Works in Calabasas

Step 1: You call us at (213) 325-2806 or request a free estimate online. We schedule an on-site assessment, usually within a few days, and walk the roof with you to identify leaks, loose fasteners, or storm damage. We'll also check flashing and attic ventilation, and we'll give you a written scope and price before any work begins.

Step 2: Once you approve, we pull the required permits through the City of Calabasas and coordinate any HOA approvals. On installation day, our crew protects your driveway and plants, then removes the old roofing or preps the existing surface. We use lifts or conveyors when access is tight, and we keep the site secure each evening.

Step 3: After the new roof is on, we do a full cleanup, including magnetic sweeps for nails, and walk the property with you to make sure you're satisfied. We don't leave until the site is clean and you've signed off on the work.

Pricing for metal roofing in Calabasas depends on the size and pitch of your roof, the material you choose, and how accessible the property is. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Repairs like leak fixes start at $450, and screw replacement or re-fastening starts at $750. Stone-coated steel and metal shingle roofing both start at $9 per square foot, while copper and specialty metals start at $20. We always provide a free estimate and a clear written contract, so you know exactly what you're paying for. Call (213) 325-2806 to schedule yours.

Do metal roofs make sense for hillside homes in Calabasas that face wildfire risk?
Yes. Metal roofs are non-combustible and can help protect your home from embers carried by Santa Ana winds. We often recommend stone-coated steel or standing seam with ember-resistant underlayment for homes near open brush, and we can walk you through the options during a free inspection.
How fast can you respond to storm damage in Calabasas?
We offer free inspections for storm and wind damage and prioritize active leaks. Call (213) 325-2806 and we'll schedule a visit as soon as possible, often within 24 to 48 hours depending on demand. We'll tarp if needed and give you a repair plan.
What does a typical metal roof repair cost in Calabasas?
Most repairs start at $450 for leak diagnosis and fixing, and screw replacement or re-fastening starts at $750. The final price depends on the extent of damage, roof height, and access. We provide a free estimate so you know the cost before we start.
Do I need a permit to replace my roof in Calabasas?
Yes, a roofing permit is typically required for a full replacement or re-roof. Requirements vary, so we recommend checking with the City of Calabasas website or calling the building department. We handle the permit application and inspections as part of our service.
My HOA requires approval for roof color. Can you help with that?
We can provide product samples and specifications for your HOA design review. Many HOAs in Calabasas have specific color and profile requirements, and we're used to working with those boards to get approval before ordering materials.
Are you insured for work on my Calabasas property?
Yes, we carry general liability insurance and workers' compensation coverage. We're happy to provide certificates of insurance upon request so you can verify our coverage before work begins.
What maintenance does a metal roof need in Calabasas?
Because of the intense sun and occasional high winds, we recommend an annual inspection to check fasteners, seals, and flashing. Clearing debris from valleys and gutters before winter storms also helps prevent leaks. We offer free estimates for inspections and maintenance.
Why choose us?

Trusted professionals in Los Angeles

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Los Angeles

All your work handled by qualified professionals in Los Angeles

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

226+ Verified Client Reviews in Los Angeles

⭐⭐⭐⭐⭐ 4.9/5 · 226 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Los Angeles · Response within 24h · No commitment · ☎ (213) 325-2806

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Los Angeles ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm