Serving the Los Angeles area  ·  (213) 325-2806  ·  Open Mon-Sun 7am-7pm
📞 (213) 325-2806 Free Quote

Metal Roofing in Los Angeles, CA (90012) · Local Professionals

Los Angeles Metal Roofing · Fast response in Los Angeles and the Los Angeles area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+226Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Los Angeles roofs take a beating. Between the Santa Ana winds that send embers flying through canyons like Laurel and Benedict, the intense UV that bakes stucco ranches in the Valley, and the marine layer that quietly corrodes fasteners near the coast, your roof is working harder than you think. Whether you own a 1920s Spanish Colonial in Silver Lake with original clay tile or a mid-century ranch in Sherman Oaks with a low-slope shingle roof, the right metal system can outlast the weather and lower your cooling bills.

Homeowners in 90012 and across Los Angeles call Los Angeles Metal Roofing because we know this city's housing stock block by block. We have replaced wind-torn panels in Highland Park, repaired leaky flashing on Craftsman bungalows near Dodger Stadium, and installed stone-coated steel on hillside homes in Eagle Rock where fire resistance is not optional. Our crews are fully insured, and we handle everything from free inspections to final cleanup.

Metal Roofing in Los Angeles (90012)

Los Angeles is not one climate. A roof in Venice deals with salt air and morning fog, while a roof in Santa Clarita faces 100-degree summers and brushfire embers. In the hills, steep driveways and tight lots mean materials have to be staged carefully, sometimes by conveyor or crane. Older neighborhoods like Angelino Heights and Highland Park have narrow streets and mature trees that drop limbs and fill gutters. Spanish tile roofs in Silver Lake often hide deteriorated underlayment, and low-slope roofs in the Valley need careful flashing details to shed water during atmospheric river storms. We size fasteners for high-wind zones, choose coatings that resist UV fade, and match panel profiles to the architectural style of your block.

Our team has worked on roofs from Boyle Heights to Brentwood, and we understand the permitting quirks of each jurisdiction. We serve Los Angeles and the surrounding areas, including ZIP 90012, with installation, repair, and replacement for residential and commercial properties.

Our services in Los Angeles

How a Job Works in Los Angeles

Step 1: Call us at (213) 325-2806 or request a free estimate online. We schedule an on-site assessment, usually within a few days, and inspect your roof, attic, and flashing. You get a written scope and a clear price before any work starts.

Step 2: Once you approve, we pull the required permits through the local building department and coordinate with your HOA if needed. On tight hillside lots or historic districts, we plan material delivery and staging to avoid blocking neighbors. Our crews remove the old roof, inspect and repair the deck, then install your new metal system with manufacturer-approved fasteners and underlayment. Most residential roofs take two to five days depending on size and complexity.

Step 3: We clean up every day and do a final magnet sweep for nails. Before we leave, we walk the roof with you, show you the completed work, and explain any maintenance. We leave your property clean and your roof ready for the next Santa Ana wind.

Metal roofing in Los Angeles is priced by the square foot, and the range depends on material and complexity. Corrugated or ribbed panel roofing starts around $5.50 per square foot, while standing seam runs from $10 per square foot. Stone-coated steel and metal shingles start at $9 per square foot. A full replacement averages $9 per square foot, and installing over existing shingles (retrofit) starts at $7 per square foot. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Coating and painting start at $2.50 per square foot. Key cost factors include roof size, pitch, access (hillside homes and tight lots cost more), the condition of the decking, and whether you need emergency repairs. Call (213) 325-2806 for a free estimate tailored to your property.

My Spanish tile roof in Silver Lake is leaking, but I want to keep the look. Can you install metal without losing the character?
Yes. We often install stone-coated steel or metal shingle profiles that mimic clay tile or shake, so you keep the Mediterranean or Craftsman look while gaining fire resistance and lower maintenance. We can also match colors to your existing trim and stucco. For historic districts, we help you choose profiles that meet design review requirements.
A Santa Ana wind storm just peeled back part of my roof in the Valley. How fast can you respond?
We offer free storm and wind damage inspections and prioritize emergency repairs. Call (213) 325-2806 and we will schedule an assessment as soon as possible, usually within 24 to 48 hours. We can tarp active leaks and secure loose panels to prevent further damage while we prepare a permanent repair plan.
What does a typical metal roof replacement cost for a 1,500-square-foot ranch home in Los Angeles?
For a 1,500-square-foot home with a simple gable roof, a corrugated panel system might start around $8,000 to $12,000, while standing seam could run $15,000 to $20,000 or more. Access, roof pitch, decking repairs, and removal of old layers affect the final price. We provide a detailed written estimate after a free inspection.
Do I need a permit to replace my roof in Los Angeles, and will you handle it?
Yes, a permit is typically required for a full replacement or re-roof, and requirements vary by jurisdiction. We pull the necessary permits and schedule inspections as part of our service. For specific rules and fees, check the City of Los Angeles website or ask us during your estimate. We never start work without the proper approvals.
My HOA requires a specific roof color. Can you help with approval, and what if a neighbor complains about property lines?
We routinely work with HOAs and can provide product samples, manufacturer specs, and color chips for your architectural review. If a property line issue arises, we follow local setback rules and can coordinate with your neighbor and the city. We document the existing property lines before installation to avoid disputes.
Are you fully insured for work on my Los Angeles property?
Yes, Los Angeles Metal Roofing is fully insured with general liability and workers' compensation coverage. Our crews are trained and covered.
What maintenance does a metal roof need in Los Angeles to survive heat and wildfire season?
Inspect fasteners and sealant annually, especially after Santa Ana wind events. Clear gutters of leaves and debris from jacaranda and eucalyptus trees. Touch up scratches or coating wear to prevent corrosion, particularly near the coast. We offer inspection and coating services to extend the life of your roof and keep it fire-resistant.
Why choose us?

Trusted professionals in Los Angeles

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Los Angeles

All your work handled by qualified professionals in Los Angeles

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

226+ Verified Client Reviews in Los Angeles

⭐⭐⭐⭐⭐ 4.9/5 · 226 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Los Angeles · Response within 24h · No commitment · ☎ (213) 325-2806

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Los Angeles ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm