Serving the Los Angeles area  ·  (213) 325-2806  ·  Open Mon-Sun 7am-7pm
📞 (213) 325-2806 Free Quote

Metal Roofing in Torrance, CA (90503) · Local Professionals

Los Angeles Metal Roofing · Fast response in Torrance and the Los Angeles area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+226Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Torrance is a city of 1950s and 1960s single-story ranches and mid-century splits, many still wearing their original shingle roofs, just a few miles from the salt air off the South Bay coast. The lots are generous, the streets are lined with mature trees, and the marine layer rolls in most mornings before burning off by afternoon. If your roof is original or nearing the end of its life, you are not alone.

Homeowners in 90503 call Los Angeles Metal Roofing because we understand what salt air and decades of sun do to a shingle roof. We have worked on homes near Wilson Park and along the streets off Sepulveda Boulevard, and we know how to handle the retrofit work that keeps these older Torrance houses watertight without a full tear-off.

Metal Roofing in Torrance (90503)

Torrance sits on a gentle coastal plain, and most of the housing stock in 90503 dates from the postwar boom. That means low-pitch roofs, tight eave overhangs, and original sheathing that has seen sixty-plus years of marine air. The salty breeze off the Pacific accelerates corrosion on fasteners and flashing, and the intense UV fades and cracks shingles long before their time. Many of these ranches also have mature trees close to the roofline, so fallen limbs and leaf debris are a constant concern, especially after a winter storm. We regularly install metal roof over shingles (retrofit) on these homes because it saves the cost of a tear-off and adds a layer of protection against the salt air. Our crews also handle gutters sized for the heavier winter rains that come through the South Bay.

We have been serving Torrance and the surrounding Los Angeles area for years, and we know the local building department quirks, the inspection timing, and the neighborhood expectations. Whether you are near the Torrance Civic Center or over by the Del Amo Fashion Center, we bring the same insured, professional crew to every job.

Our services in Torrance

How a Job Works in Torrance

Step 1: You call us at (213) 325-2806 or request a free estimate online. We schedule an on-site assessment at your Torrance property, usually within a day or two. We inspect the roof, check the attic if accessible, and talk through your options, from a repair to a full replacement. You get a written estimate before any work begins.

Step 2: Once you approve, we pull the necessary permits from the City of Torrance and coordinate with your HOA if you have one. Our crew arrives on time, protects your landscaping, and works efficiently. On older Torrance ranches, we often find that a metal roof over shingles is the right fit, and we handle the prep work to make sure the new roof sits flat and drains properly. We keep you updated on progress and any surprises we find under the old roof.

Step 3: When the job is done, we clean up thoroughly, haul away all debris, and walk the property with you. We make sure you know how to care for your new metal roof and that every detail, from flashing to gutters, is finished to your satisfaction. We do not leave until you are happy.

Pricing for metal roofing in Torrance depends on the size of your roof, its current condition, access, and the material you choose. For a typical 1,500 to 2,000 square foot ranch home, metal roof installation starts around $8 per square foot, while standing seam runs about $10 per square foot. A metal roof over shingles (retrofit) starts at $7 per square foot, which is often the most economical choice for these older homes. Repairs, such as fixing a leak or replacing screws, start at $450, and gutter installation starts at $9 per linear foot. We provide free estimates and will give you a clear, written price before any work starts. Call (213) 325-2806 to schedule yours.

My 1950s ranch near Wilson Park has original shingles. Can you install a metal roof over them, or do I need a full tear-off?
In many cases, yes, we can install a metal roof over your existing shingles, provided the roof structure is sound and there is only one layer of shingles. This retrofit saves you the cost and mess of a tear-off. We will inspect your roof and attic to confirm it is a good candidate. If there are already two layers or any underlying damage, we will recommend a full replacement to keep your home protected.
A winter storm just lifted some panels on my roof. How fast can you respond in Torrance?
We prioritize storm damage calls and can usually get a crew out to your Torrance property within 24 to 48 hours for an emergency inspection and temporary repair. Call us at (213) 325-2806 to report the damage and schedule a visit. We will secure the roof and provide a written estimate for permanent repairs.
What is the typical cost to replace a roof on a 1,800 square foot home in 90503?
For a home that size, a full metal roof replacement typically starts around $9 per square foot, so you might be looking at $16,000 to $20,000 depending on the material and complexity. A retrofit over shingles starts at $7 per square foot, which can bring the cost down. We provide free, no-obligation estimates so you know exactly what to expect.
Do I need a permit from the City of Torrance for a metal roof installation?
Yes, roofing permits are generally required for a full replacement or re-roof in Torrance. The exact requirements and fees vary, so it is best to check with the City of Torrance website or call the building department. We handle the permit application and inspections for you as part of our service.
My HOA has design rules. Can you help with approval for a metal roof?
Absolutely. We are familiar with many HOAs in Torrance and can provide the documentation they need, such as material samples, color chips, and specifications. We recommend getting HOA approval before work begins, and we can coordinate with your board to make the process smoother.
Are you fully insured for work on my Torrance property?
Yes, we are fully insured with both general liability and workers' compensation coverage.
How often should I have my metal roof inspected in Torrance, given the salt air?
We recommend an inspection every two to three years for metal roofs in Torrance because the salt air can accelerate corrosion on fasteners and flashing. A quick inspection can catch loose screws or minor issues before they become leaks. We offer free estimates for inspections and can set up a maintenance plan to keep your roof in top shape.
Why choose us?

Trusted professionals in Los Angeles

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Los Angeles

All your work handled by qualified professionals in Los Angeles

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

226+ Verified Client Reviews in Los Angeles

⭐⭐⭐⭐⭐ 4.9/5 · 226 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Los Angeles · Response within 24h · No commitment · ☎ (213) 325-2806

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Los Angeles ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm