Serving the Los Angeles area  ·  (213) 325-2806  ·  Open Mon-Sun 7am-7pm
📞 (213) 325-2806 Free Quote

Metal Roofing in Long Beach, CA (90804) · Local Professionals

Los Angeles Metal Roofing · Fast response in Long Beach and the Los Angeles area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (213) 325-2806
+226Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Long Beach is a city of Craftsman bungalows and harbor-side homes, and the salt air off the Pacific hits every roof here. In ZIP 90804, you are close enough to the water that marine layer and onshore breeze work on fasteners and flashing year-round, and the summer sun is just as relentless.

We are Los Angeles Metal Roofing, and Long Beach homeowners call us because we know what salt air does to a roof. From the bungalows near Recreation Park to the homes along Anaheim Street, we handle metal roof coating, repair, and replacement with insured crews who work clean and show up when we say we will.

Metal Roofing in Long Beach (90804)

Long Beach sits on a coastal plain with a high water table and sandy soil, so drainage and roof edge details matter as much as the panels themselves. The housing stock in 90804 runs from 1920s Craftsman bungalows with low-pitched roofs and deep porches to mid-century ranches and small apartment buildings. Salt air corrodes fasteners and flashing before the panels fail, and the strong afternoon sun breaks down coatings on south and west slopes. Many lots are tight, with detached garages and narrow side yards, so staging and access take planning. Older homes often have layers of shingles that need to come off before a metal roof goes on, and we check that against local code.

Our team has worked roofs across Long Beach and the surrounding Los Angeles area, from Belmont Shore to Bixby Knolls. We know the difference between a harbor-side home that needs corrosion-resistant fasteners and an inland bungalow that mostly fights heat and UV.

Our services in Long Beach

How a Job Works in Long Beach

Step 1: You call (213) 325-2806 or request a free estimate. We come out, walk the roof, check the attic and flashing, and give you a written scope with pricing. No pressure and no vague numbers.

Step 2: We pull the permit if one is required and schedule the work. On tight Long Beach lots, we plan material drops and dumpster placement so we do not block your driveway or your neighbor's. If your home is in a historic district or under HOA review, we help you get the panel profile and color approved before we order.

Step 3: We clean up every day and do a final walkthrough with you. Magnets sweep the yard for screws, gutters get checked, and we do not leave until you have seen the finished job and know what to expect going forward.

Pricing in Long Beach depends on roof size, access, how many layers are already there, and how much repair is needed before new metal goes on. Metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Repairs and leak repairs start at $450, screw replacement and re-fastening at $750, and metal roof coating at $2.50 per square foot. Copper and specialty metal runs higher, starting at $20 per square foot. A free estimate at (213) 325-2806 is the fastest way to get a real number for your home.

My 1920s bungalow near Recreation Park has original skip sheathing. Can you still install a metal roof?
Yes, but we will check the sheathing first. Skip sheathing and old plank decks are common in that part of Long Beach, and we usually add a solid substrate or purlins so the panels have a flat, secure base. We will show you what we find before we price the fix.
A storm just peeled back panels on my roof in Long Beach. How fast can you get out?
Call (213) 325-2806 and we will schedule a free inspection as soon as we can, usually within a day or two for active leaks or wind damage. We can tarp or secure the area to stop water intrusion and then give you a written repair scope.
What does a typical metal roof replacement cost in 90804?
Most replacements in this ZIP fall between the low thousands and the mid teens depending on square footage, pitch, and whether we remove old shingles. Replacement starts at $9 per square foot, and standing seam starts at $10. Tight access or extra flashing can add to that, so the free estimate is the real number.
Do I need a permit to re-roof my Long Beach home?
Usually yes for a full replacement or re-roof, and the rules on how many existing layers you can cover vary. Start with the City of Long Beach website to confirm what your property needs, and we will pull the permit and handle inspections as part of the job.
My neighbor says my new metal roof will drain onto their property. What are the rules?
Roof drainage and property line rules in Long Beach are handled by the city, and we design gutters and downspouts to keep water on your side. If there is a dispute, we can point you to the city and adjust the layout so runoff does not cross the line.
Are you insured for work on my Long Beach property?
Yes. We carry general liability and workers' compensation insurance, and we can provide proof before work starts. That protects you if anyone gets hurt or something gets damaged on your property.
What maintenance does a metal roof need in Long Beach's salt air?
Salt air is hard on fasteners and flashing, so we recommend a yearly inspection and washing the roof a couple of times a year, especially near the harbor. Coating every several years helps on older panels, and we replace corroded screws before they become leaks.

Nearby service areas

📍 Los Angeles 90012📍 Glendale 91208📍 Pasadena 91104📍 Burbank 91502
Why choose us?

Trusted professionals in Los Angeles

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Los Angeles

All your work handled by qualified professionals in Los Angeles

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

226+ Verified Client Reviews in Los Angeles

⭐⭐⭐⭐⭐ 4.9/5 · 226 verified Google reviews

Tom D.
⭐⭐⭐⭐⭐
TD
Tom D.
Pasadena

“We needed a metal roof on our barn out in the valley and these guys knocked it out in two days. The corrugated panels are straight as an arrow and they cleaned up every last screw off the ground. Our horses are back in there happy.”

Agricultural Metal Roofing
Michelle B.
⭐⭐⭐⭐⭐
MB
Michelle B.
Glendale

“We were dreading tearing off the old shingles on our 1920s craftsman, but they did the retrofit right over the top and the house looks brand new. The crew of four was respectful of the old wood trim and finished in three days flat.”

Metal Roof Over Shingles (Retrofit)
Kevin R.
⭐⭐⭐⭐
KR
Kevin R.
Torrance

“Had them put a standing seam roof on my shop building and it came out great. Only reason I'm not giving five stars is they showed up a day late on the first day, but the work itself is solid and the price was fair.”

Commercial Metal Roofing
Karen T.
⭐⭐⭐⭐⭐
KT
Karen T.
Los Angeles

“Just had our whole house done in standing seam and I can't stop looking at it from the street. They walked me through the color options and the finished roof is exactly what I pictured. Crew was in and out in four days and the yard was spotless.”

Standing Seam Metal Roofing
Robert M.
⭐⭐⭐⭐⭐
RM
Robert M.
Burbank

“Water was pouring in around our chimney every time it rained and two other roofers just wanted to sell us a whole new roof. These guys found the failed flashing, fixed it properly, and charged a fraction of what I expected. Bone dry through the last storm.”

Chimney & Skylight Repair
Rachel S.
⭐⭐⭐⭐⭐
RS
Rachel S.
Santa Monica

“Called them out for an inspection after some wind damage and they spent over an hour on the roof and gave me a detailed report with photos. Turns out I just needed a few screws re-fastened, no upselling at all. Honest folks.”

Metal Roof Inspection
Chris A.
⭐⭐⭐⭐⭐
CA
Chris A.
Long Beach

“Our place sits up on a hill and the metal roof had been leaking near the valley for years. They tracked down the source, replaced the bad panels and flashing, and it's been solid through two big rainstorms since. Genuinely relieved.”

Metal Roof Repair
Sarah W.
⭐⭐⭐⭐
SW
Sarah W.
Inglewood

“They installed new gutters matched to our metal roof and it made a huge difference with the runoff. The crew was friendly but left a few metal shavings in the driveway I had to sweep up myself. Overall a good job though.”

Gutters for Metal Roofs
Free Quote

Get Your Free Quote

Metal Roofing in Los Angeles · Response within 24h · No commitment · ☎ (213) 325-2806

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Los Angeles ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm