Serving the Los Angeles area  ·  (213) 325-2806  ·  Open Mon-Sun 7am-7pm
📞 (213) 325-2806 Free Quote

Metal Roofing in Thousand Oaks, CA (91360) · Local Professionals

Los Angeles Metal Roofing · Fast response in Thousand Oaks and the Los Angeles area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (213) 325-2806
+226Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Thousand Oaks is a city of ranch homes and hillside properties tucked between the Santa Monica Mountains and the Conejo Valley, where the Santa Ana winds and brush fire embers are a yearly reality. From the tree-lined streets of Newbury Park to the winding roads off Lynn Road, roofs here take a beating from sun, wind, and the occasional winter storm.

Homeowners in Thousand Oaks (91360) call Los Angeles Metal Roofing because we understand the local risks: ember-resistant stone-coated steel, wind-rated panels, and repairs that hold up when the next Santa Ana event rolls through. Our fully insured crews are based in Los Angeles and serve Thousand Oaks and the surrounding areas.

Metal Roofing in Thousand Oaks (91360)

Thousand Oaks sits on uneven ground, with many homes built on slopes or tucked into canyons where access is tight and drainage is critical. The housing stock includes 1960s and 1970s ranch homes with low-pitch roofs, newer stucco subdivisions with concrete tile, and hillside properties that face high wind exposure. Metal roofing here has to handle intense UV, heat waves, and the ember showers that come with wildfire season. We regularly install stone-coated steel and standing seam systems that meet fire ratings and hold up to wind uplift. For older ranch homes, we often recommend a metal roof over shingles retrofit, which saves on tear-off costs and landfill waste, but we always check local code limits on existing layers first.

Our team has worked throughout Los Angeles County, from the San Fernando Valley to the foothills, and we bring that experience to every Thousand Oaks project. We know the local building department and the inspection process, and we plan for the wind and fire exposure that is specific to this area.

Our services in Thousand Oaks

How a Job Works in Thousand Oaks

Step 1: Call us at (213) 325-2806 or request a free on-site assessment. We inspect your roof, check for existing damage, and discuss your options, whether it is a repair, a replacement, or a new installation. We also review your property's access and any HOA requirements.

Step 2: Once you approve the estimate, we schedule the work and handle the permitting process. Thousand Oaks has specific requirements for re-roofs, and we verify them with the city before starting. Our crews are experienced with tight lots and hillside access, so we plan for material staging and safety. We also coordinate with your HOA if design approval is needed.

Step 3: After the work is done, we clean up thoroughly, haul away all debris, and walk the property with you to make sure everything meets your expectations. We do not leave until you are satisfied.

Pricing for metal roofing in Thousand Oaks depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. For repairs, metal roof leak repair starts at $450, and screw replacement and re-fastening starts at $750. Stone-coated steel roofing, which is popular here for its fire resistance, starts at $9 per square foot. We provide free estimates and explain all cost factors upfront, including access, removal of old materials, and any necessary flashing or decking repairs. Call (213) 325-2806 to schedule your free estimate.

My ranch home in Newbury Park has a low-pitch roof. Can you install metal over the existing shingles?
Yes, we offer metal roof over shingles retrofit starting at $7 per square foot. However, local code limits the number of existing layers, so we will check with the City of Thousand Oaks before proceeding. This option can save you money on tear-off and disposal, but we always verify that your roof structure can handle the added weight.
A Santa Ana wind storm just lifted some panels on my roof in Thousand Oaks. How quickly can you respond?
We prioritize storm and wind damage repairs. Call us at (213) 325-2806, and we will schedule an inspection as soon as possible, often within 24 to 48 hours. We secure the area, document the damage for insurance if needed, and provide a repair plan. Our team is experienced with wind-lifted panels and can re-fasten or replace them to prevent further issues.
What is the typical cost to replace a metal roof on a 2,000 square foot home in Thousand Oaks?
For a typical 2,000 square foot home, a metal roof replacement might range from $18,000 to $25,000, depending on the material (stone-coated steel, standing seam, etc.), roof complexity, and access. Standing seam is on the higher end. We provide a detailed free estimate after inspecting your roof. Call (213) 325-2806 to get started.
Do I need a permit to replace my roof in Thousand Oaks, and how do I get one?
Yes, a roofing permit is typically required for a full replacement or re-roof in Thousand Oaks. The City of Thousand Oaks website has information on permits and inspections, and we can guide you through the process. We handle permit applications as part of our service, ensuring compliance with local codes and scheduling inspections.
My HOA requires approval for roof color. Can you help with that?
Absolutely. We are familiar with HOA design review processes in Thousand Oaks and can provide material samples, color chips, and specifications for your HOA submission. We will coordinate with your HOA to ensure the chosen metal roofing meets their guidelines. If there are property line concerns, we also verify setbacks and easements before installation.
Are you insured for work on my Thousand Oaks property?
Yes, we are fully insured with general liability and workers' compensation coverage. This protects you and your property in case of any accidents during the project.
What maintenance does a metal roof need in Thousand Oaks's climate?
Metal roofs are low maintenance, but in Thousand Oaks, we recommend annual inspections, especially after wildfire season and winter storms. Check for loose fasteners, debris accumulation in valleys, and any signs of sealant wear. We offer free inspections and can perform minor repairs to keep your roof in top shape. Call (213) 325-2806 to schedule.

Nearby service areas

📍 Los Angeles 90012📍 Glendale 91208📍 Pasadena 91104📍 Burbank 91502
Why choose us?

Trusted professionals in Los Angeles

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Los Angeles

All your work handled by qualified professionals in Los Angeles

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

226+ Verified Client Reviews in Los Angeles

⭐⭐⭐⭐⭐ 4.9/5 · 226 verified Google reviews

Tom D.
⭐⭐⭐⭐⭐
TD
Tom D.
Pasadena

“We needed a metal roof on our barn out in the valley and these guys knocked it out in two days. The corrugated panels are straight as an arrow and they cleaned up every last screw off the ground. Our horses are back in there happy.”

Agricultural Metal Roofing
Michelle B.
⭐⭐⭐⭐⭐
MB
Michelle B.
Glendale

“We were dreading tearing off the old shingles on our 1920s craftsman, but they did the retrofit right over the top and the house looks brand new. The crew of four was respectful of the old wood trim and finished in three days flat.”

Metal Roof Over Shingles (Retrofit)
Kevin R.
⭐⭐⭐⭐
KR
Kevin R.
Torrance

“Had them put a standing seam roof on my shop building and it came out great. Only reason I'm not giving five stars is they showed up a day late on the first day, but the work itself is solid and the price was fair.”

Commercial Metal Roofing
Karen T.
⭐⭐⭐⭐⭐
KT
Karen T.
Los Angeles

“Just had our whole house done in standing seam and I can't stop looking at it from the street. They walked me through the color options and the finished roof is exactly what I pictured. Crew was in and out in four days and the yard was spotless.”

Standing Seam Metal Roofing
Robert M.
⭐⭐⭐⭐⭐
RM
Robert M.
Burbank

“Water was pouring in around our chimney every time it rained and two other roofers just wanted to sell us a whole new roof. These guys found the failed flashing, fixed it properly, and charged a fraction of what I expected. Bone dry through the last storm.”

Chimney & Skylight Repair
Rachel S.
⭐⭐⭐⭐⭐
RS
Rachel S.
Santa Monica

“Called them out for an inspection after some wind damage and they spent over an hour on the roof and gave me a detailed report with photos. Turns out I just needed a few screws re-fastened, no upselling at all. Honest folks.”

Metal Roof Inspection
Chris A.
⭐⭐⭐⭐⭐
CA
Chris A.
Long Beach

“Our place sits up on a hill and the metal roof had been leaking near the valley for years. They tracked down the source, replaced the bad panels and flashing, and it's been solid through two big rainstorms since. Genuinely relieved.”

Metal Roof Repair
Sarah W.
⭐⭐⭐⭐
SW
Sarah W.
Inglewood

“They installed new gutters matched to our metal roof and it made a huge difference with the runoff. The crew was friendly but left a few metal shavings in the driveway I had to sweep up myself. Overall a good job though.”

Gutters for Metal Roofs
Free Quote

Get Your Free Quote

Metal Roofing in Los Angeles · Response within 24h · No commitment · ☎ (213) 325-2806

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Los Angeles ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm